Question 1

Steam Boiler Repair

Accepted Answer

Heating equipment such as boilers is costly and complicated, and they need regular maintenance to run efficiently without any issues. Conducting the boiler repair by yourself is very challenging and requires more time. There are also chances that the boiler gets damaged, and it may endanger your family and the people located in the surrounding.

So leave the steam boiler repair to the expert or technician. You can go for steam boiler repair near your locality.

This article gives a complete guide on steam boiler repair that will help you understand how a steam boiler works, identify the problems that commonly occur in a steam boiler, and which types of parts and tools we need to fix the steam boiler.

Question 2

Steam Heating System Repair

Accepted Answer

If you are not sure about the proper maintenance of your system, you can hire a service person to help you. When some problems occur in the design, there are a few things that you can handle by yourself.

A slightly hammering noise may occur if the radiator is not sloped in a steam system. The Steam boilers required less maintenance, including cleaning the system to improve and maintain efficiency. The residues and the debris must be removed from the chamber to keep the steam boiler clean and avoid the repair cost required for these steam boilers.
The repairing cost for a boiler is about Rs 500 to Rs 1,800, and the maximum price is 2,500.

Question 3

Steam Boiler Cleaning

Accepted Answer

The boiler tubes that contain deposits will create long-term issues in terms of the durability of the boiler. The deposits insulate the water from fire and increase the metal temperature. So it is necessary to clean the steam boiler regularly.

The step-by-step process for repairing the steam boiler is as follows:

The primary purpose of cleaning a steam boiler is to remove all the debris, oil, and other unwanted materials.
The steam boiler cleaning also helps improve steam quality and minimizes corrosion.
While chemical cleaning the steam boilers, firstly, we remove the pressure transmitters because the chemical can damage the transmitters.
Then, we need to isolate our boiler by closing the gate valves and keeping the maintenance hole open for inspection.
Fill the boiler with the water and check the pH before starting cleaning the boiler.
Keep a check on the temperature because the excessive temperature can cause corrosion.
Keep the boiler turning on and off to maintain the temperature.
Keep checking the pH and water in the vessel and rinse the internal of the boiler.
If the boiler's cleaning is successful, add chemicals to it.

While cleaning the boiler, you must be careful as the boiler will be hot, and it can burn you if you slip and do not take the precautions properly.

Question 4

Steam Boiler Descaling Chemical

Accepted Answer

Ethylenediamine tetraacetic acid (EDTA) is the most commonly used active cleaning chemical.
The primary purpose of using boiler descaling chemicals is to remove scale deposits from the boiler, piping system, cooling tower, power plants, equipment, etc.

Benefits of Using Steam Boiler Descaling Chemical
Increase the capacity of boilers and pipes to their extreme level in heat transfer and water circulation by removing chalking pipes.
And also prevents breakages and leakages of the pipes and contains accident hazards.
It prevents unwanted shutdown of your plant, and so that improves profitability.

Question 5

Steam Heat Repair

Accepted Answer

The step-by-step process of repairing steam heat repair are as follows:

First, check the master switch, circuit breaker, or fuse.
Then make sure whether the boiler is receiving fuel or not, and the inlet of the fuel valve should be open.
Check the thermostat.
Bleed the air from the convectors by opening each air valve with a wrench until the water squirts out.
Catch out the water in the bucket or bowl.

Question 6

Importance of Boiler Repair and Maintenance

Accepted Answer

Here are some of the benefits of the maintenance of the boiler that will help you to save the additional cost required for the repairing of the boiler as follows:

It will increase the durability and the safety of the boiler
Saves costs needed for water and fuel
To reduce the emission
Anticipated downtime for maintenance
Higher energy efficiency

Question 7

Precautions to Follow for the Maintenance of the Boiler

Accepted Answer

Maintain the record of the boiler for all the daily operational activities.
Conduct a bottom blowdown
Conduct a water column blowdown
Monitor the water boiler and the steam pressure in the boiler
Assess the stack temperature of the boiler
Ensure proper functioning of the boiler equipment
Conduct thorough checking of leakages of gas and water.
Inspect air dampers to prevent the accumulation of dirt.

Steam Boiler Repair | Steam Heating System Repair | Steam Boiler Cleaning | Steam Boiler Descaling Chemical