What Is a Flywheel? | Functions of Flywheel | Types of Flywheel | Common Problems of Flywheel

What Is a Flywheel?

As a heavy wheel, a flywheel needs sufficient force to rotate on its axis. It opposes the change in rotational speed from its moment of inertia. Changing the energy stored on the Flywheel, its rotational speed must be increased or decreased.

That is, it keeps spinning until a lot of force is applied. A large amount of kinetic energy is conserved when the Flywheel is spinning.

This energy is later used to start the engine or drive the vehicle at high speed. Today we will look at the definition, construction, function, working principle, and symptoms of a bad automobile flywheel.

Also, Read: How Do Escalators Work? | How Do Escalators Work? | Types of Escalator | Types of Escalator | Components of Escalator

Functions of Flywheel:

The Flywheel can be found in almost all types of automobiles as they serve different purposes, which will be discussed here. The functions of a flywheel in an automobile engine are given below:

#1. Engine Balance

Because the piston is offset from the center of crankshaft vibration and wobble, this is also because each piston fires at a different angle.

The function of the Flywheel in this situation is to suppress the side-to-side motion. This is achieved due to the heavyweight of the Flywheel. The Flywheel reduces vibrations throughout the engine as the engine is stable and balances on the mounts.

#2. Engine Start

The Flywheel plays another role when starting the engine. The gear teeth on the Flywheel are connected to the starter motor. This starter motor is controlled by the car key, so when the car starts, the starter motor spins the Flywheel. Immediately the engine spins, the combustion effect keeps the engine running. The Flywheel retracts the Bendix gear in the started motor to rotate freely.

#3. Drivetrain Stress Reduction

Another function of a flywheel is achieved by stabilizing engine speed. It also smooths engine speed and reduces wear and tear on drivetrain components.

The Flywheel also limits the wear between the transmission shaft and the driveshaft. These two are connected by a universal joint.

#4. Engine Speed Soothing

The crankshaft converts piston movement into rotary motion, which is jerky when power is generated. The rotational speed of the crankshaft is constants, & the engine runs smoothly. This is because the mass of the Flywheels applies inertia that keeps the engine crankshaft rotating between each piston firing.

#5. Weight Manipulation

The weight of the Flywheel determines engine performance. The weight is designed based on the performance of the vehicles. The heavy Flywheel allows the engine to operate under loads that can cause engine failure. A larger truck or trailer does well with a heavy flywheel, while sports cars and some commercial cars make good use of a lighter flywheel.

Also, Read: What Is a Planetary Gearbox? | Why Is It Named a Planetary Gearbox | Possibilities of Planetary Gearboxes | Types of Planetary Gearbox

Types of Flywheel:

#1. Solid Disc Flywheel

A solid disc flywheel is a kind of Flywheel. It is used in singles flywheel thresher, which is made of cast iron. Solid Disc Flywheel The Flywheel is equipped with a hub and disc. In the design calculations of a solid disc flywheel, various parameters are used as inputs. This includes the dimensions of the Solid Disc Flywheel. In addition, the resulting functional values ​​are calculated.

#2. Rimmed Flywheel

A rim-type wheel will detonate at a much lower rotary speed than a solid disc-type wheel of the same weight & diameter. For minimal weight and high energy-storage capacity, flywheels can be made from high-strength steel and produced as a tapered disc, which is thicker in the center.

#3. High-Velocity Flywheel

In this type of Flywheel, the high-velocity Flywheel has a velocity between 30000 rpm to 80000 rpm. It can also be adjusted up to 100,000 rpm. They have magnetic levitation bearings & require little maintenance. In terms of size/capacity, they are lighter in weight than low-velocity flywheels. They are more expensive than low-velocity flywheels.

#4. Low-Velocity Flywheel

In this type of Flywheel, the low-velocity Flywheel has a velocity of 10000 rpm. They are heavier and heavier than the high-velocity Flywheel. They require periodic maintenance and do not use magnetic levitation bearings.

Their installation requires special concrete construction to bear its own weight. They are more economical than high-velocity flywheels.

Also, Read: What Is Jackscrew? | How Screw Jack Works? | Lead Screw | Types of Screw Jack

Common Problems of Flywheel:

#1. Clutch Dragging

In this case, the clutches will not release completely. These will cause different levels of gear grinding when changing gears. Also, when it starts to a standstill, the car may completely fail to put it in first gear. This problem occurs not only in the Flywheel but also in the bearing or bushing of the Flywheel or crankshaft assembly.

#2. Clutch slipping

This problem occurs when the gear changes automatically while driving. This can cause the gear to slip. This happens when power are not transferred to the wheel, resulting in clutch failure.

A slipping clutch will eventually deform the Flywheel as well.

The pressure plate can cause a sudden grinding sound. The other parts of flywheels in the clutches assembly will heat up. These will lead to bends and even cracks.

#3. Burning smell

When the clutch wears out, a burning smell will arise. It is caused by a faulty flywheel or unskilled operators. The face of the clutches is designed with the proposed materials to reduce the amount of sound the clutch makes while operating. It produces a lot of heat due to friction when the facing is not operated properly.

#4. Clutch Chatter

This is when the clutch has difficulty engaging. As the clutch takes hold, it slips along with the Flywheel and repeatedly releases the Flywheel. It sounds like a stutter or vibration when released.

Clutch chatter often occurs in any gear when starting with a full stop.

This fault can be difficult to identify because there is a defect in the clutch disc, pressure plate, or release bearing. These parts can also be broken, deformed, or contaminated with oil.

#5. Clutch Pedal Vibration

You may have noticed that the clutches pedal or the vehicle floor vibrates when the Flywheel is damaged. This is because the spring mount of the Flywheel has declined. Let us tell you that the spring mechanisms reduce the vibration caused by the clutches being used.

Also, Read: What Is a Car Roof Lining? | How to Repair Car Headliner | Maintaining Your Car Headliner | Headliner and Sagging Roof Lining

Parts of Flywheel:

#1. Flywheel Housing

The flywheel housing is solid and sits on the outside of the Flywheel. The flywheels are the part of the engine that spins and provides power to the alternator.

#2. Springs

The Flywheel is composed of two-stage bent springs in parallel. The external arc is adjusted to raise the spring when the engine is running. The soft outers arc spring only serves to rectify the indefinite resonant frequency range.

#3. Planetary Wheel

A planetary wheel consists of several planetary gears fixed on a flywheel bracket. When the flywheel bracket is driven by a screw and rotates, each planetary gear meshing with the outer ring gear generates a compound motion composed of revolutions and rotations.

#4. Axial and Radial Sliding Bearing

Whereas an axially acting bearing serves only for weight compensation, imbalance or parasitic radial forces introduced by the motor or generator unit must be compensated.

Radial Bearings.

#5. Ring Gear

A ring gear is mounted in the outer diameter of the Flywheel. It is usually attached to the Flywheel by means of an interference fit, which is prepared by heating the ring gear. So, thermal expansion enables it to be placed around the Flywheel.

#6. Support Disc

As the name suggests, support discs are attached to the inside of the Flywheel to support the two-stage bent springs and other components of the Flywheel.

#7. Flywheel Sliding Shoe

Sliding shoes preferably have a convex radial exterior that is on the inner wall of the flywheels. In these areas, they are preferably manufactured to promotes slip and withstand the least amount of wear and tear.

#8. Flywheel Cover

The flywheel cover is usually made of chrome. These chrome-plated flywheel covers will prevent dust from getting into the inner workings of the Flywheel, causing it to run poorly.

Also, Read: What Is CVT Transmission? | History of the CVT | How Does a CVT work? | CVT Transmission Pros | CVT Transmission Cons

Working Principle:

The working principle of the Flywheel is quite simple and interesting as it stores the energy for the use of the vehicle. Just as a mechanical battery stores energy in chemical form, the Flywheel saves power in the form of kinetic energy.

The more energy is produced, the more speed the Flywheel spins. It has a high moment of inertia which means heavy. It is better to spin faster than to increase its mass. This is because a lighter wheel generates twice as much energy as a flywheel that is more or twice as heavy.

That is, the lighter the Flywheel; the more energy is stored. It is advisable to use light, high-speed wheels instead of wheels with a large weight. But heavy vehicles will be suitable for heavy vehicles like trailers, trucks, vans, etc. This is because they carry extra weight and are not important for running at high speeds.

So, knowing how a flywheel works, the higher the speed, the higher the energy. However, if the speed continues to increase, the wheel may not be able to handle the material force. This can lead to a breakup.

Also, Read: How Do Escalators Work? | How Do Escalators Work? | Types of Escalator | Types of Escalator | Components of Escalator

Applications of Flywheels:

Here, the different applications of flywheels are as follows:

• In wind turbines
• With a motorized generator to store energy
• in automobile engine
• In electric cars, to increase speed (in the experimental phase)
• In advanced locomotive propulsion systems
• Advanced Technology in Transit Buses
• To control the direction of satellites.
• In large power grids for protection against interruptions

Advantages of Flywheel:

Here, the different advantages of the flywheel are as follows:

• Low and high cost
• High Vitality Storage Limit
• high power yield
• They are sheltered, solid, vitality productive, and tough.
• This work is free from temperature.
• A low and economical maintenance
• High Vitality Thickness

Also, Read: Keyless Remote Battery Is Low | When Does Key Fob Battery Replacing Replacing? | How to Replace a Keyless Remote Battery

---

Frequently Asked Questions (FAQ)

What Is a Flywheel?

A flywheel is a computerized apparatus that operates the conservation of angular momentum to store rotational energy, a form of kinetic energy proportional to the consequence of its moment of inertia and the square of its rotational momentum.

Flywheel What Is It?

In a manual transmission, the flywheel is a thick metal disc. It’s typically made of cast iron, steel or, in some cases, aluminum. It’s extremely rigid to prevent flexing or warpage during use.

What Does a Flywheel Do?

A flywheel is a heavy wheel attached to a rotating shaft so as to smooth out the delivery of power from a motor to a machine. The inertia of the flywheel opposes and moderates fluctuations in the speed of the engine and stores the excess energy for intermittent use.

What Is a Flywheel on a Car?

A flywheel is a heavy disc attached to the end of a rotating shaft that helps smooth out the engine’s power pulses and store energy through rotational momentum. Related: What Is a Misfire and What Causes It?

What Does a Lightweight Flywheel Do?

With a lightweight flywheel right away, you will notice the engine revs more quickly. You free up the horsepower your engine is already making and send it to the rear wheels rather than have it dissipate as parasitic losses.

Functions of Flywheel

In automobile engines, the flywheel serves to smooth out the pulses of energy provided by the combustion in the cylinders and to provide energy for the compression stroke of the pistons.

Flywheel Uses and Functions

In automobile engines, the flywheel serves to smooth out the pulses of energy provided by the combustion in the cylinders and to provide energy for the compression stroke of the pistons.

Flywheel in Punching Press

The flywheel used in the press acts as an energy bank between the source of power & the driven machinery. In a punching machine, maximum power is required only during a small part of the cycle when actual punching or shearing takes place.

Types of Flywheel

• Engine Balance
• Engine Start
• Drivetrain Stress Reduction
• Engine Speed Soothing
• Weight Manipulation

Flywheel Cost

The replacement cost of a flywheel can range considerably. There are some flywheels that cost under $50, while others cost as much as $400 or more. It all depends on what type of car you drive, how durable the flywheel is, and whether the part is an exact OEM replacement or aftermarket.

Parts of Flywheel

• Flywheel Housing
• Springs
• Planetary Wheel
• Axial and Radial Sliding Bearing
• Ring Gear
• Support Disc
• Flywheel Sliding Shoe
• Flywheel Cover

Flywheel Working Principle

The basic working principle of a flywheel is that it absorbs rotational energy during the power stroke and delivers that energy during other strokes ( suction, compression, and exhaust). The energy equation depends on the angular velocity and moment of inertia of the flywheel.

---