Mechanical Realm

What Are Tin Snips | Different Types | Types of Tin Snips

What Are Tin Snips?

What Are Tin Snips?

The aviation snips, also known as tin snip cutter or compound snips, even though they are distinct from types of snips, are the best hand tools for cutting metal sheets.

It is easy to cut in a straight line with tin snips. It’s making curved cuts that can be tricky, especially if you’re holding the wrong tool.

Tin snips, also known as tin snips, tinner snips, and shears, are hand tools specifically designed for cutting sheet metal.

Tin snips look similar to ordinary scissors; however, they are much sturdier and allow control for precise cutting.

Also, Read: How Do Bolt Cutters Work? | Intended Use of Bolt Cutters | Handles of Bolt Cutters | The Adjustability of Bolt Cutters

Different Types:

There are varieties of different types of tin snips that are usually distinguished by the shape and direction of the blade.

The three commons types are straight-cut tin snips, offsets tin snips, and vertical tin snips.

1. Straight-Cut Tin Snips

The Straight-cut tin snips have straight blades that are slightly shorter than the length of the scissor blade.

However, the blades are much thicker & heavier than scissor blades to enables them to cut through sheet metal.

These tin snips usually have yellow handles, so you can quickly separate them with an offset snip.

Offsets tin snips fall into two categories:

a. Clockwise-cut tin snips:-

As the name indicates, clockwise cut tin snips are used to cut in clockwise directions.

They have a green handle to sets them apart from counterclockwise-cut snips.

b. Counterclockwise-Cut Tin Snips:-

Counterclockwise-cut tin snips can be recognized by their red handles. This tin snip is bests paired with clockwise-cut snips so you can effectively make curved cuts in both directions.

2. Vertical tin snips

The Vertical tin snips have a set of blades that sit at right angles to the handle of the tool, which is why they are also knowns as right-angles tin snips. This tool is ideal for tight spaces where only Snip’s blades can fit.

Also, Read: What Are Impact Sockets | Reviews of Impact Socket | Accessories of Impact Socket

Useful Article For You

Types of Tin Snips:

Types of Tin Snips

1. Choose Your Tin Snips

Choose Your Tin Snips

Cutting sheet metal with pieces can be difficult and frustrating. The edges are sharp, the cutoffs are tight and get in the way, snips are bound, or you can’t negotiate the curve.

These problems are common to those of us who don’t work with sheet metal every day. But you don’t have to be a tinsmith to successfully cut sheet metal.

With the right tools & few simple techniques, you can make almost any cut with ease.

We’d recommend a pair of tin snips that will get you through 90 percent of the jobs you run.

But we’ll also indicate the best tin snips to use for each type of cut we show.

2. IRWIN Tin Snip, Multi-Purpose

IRWIN Tin Snip, Multi-Purpose

Tin Snip, multi-purpose, 11-3/4-Inch If you’ve been using your tin snips to work on roof repairs, these straight-cut tools are worth a look.

Long, the drop-forged steel blade is ideal for straight cuts in large pieces of metal sheet roofing, and precision-sharp blades cut into the material when cutting edges, making the blade less likely to slip.

These tin snips also have an easy closing latch to keep them secure when they’re not in use and feature a compound sawing action that increases the power you can put into the cut—making it easy to reach 24-gauge cold.

-Roll steel or 26-gauge stainless steel. The grips are padded and textured for a comfortable feel without sacrificing control.

3. Straight Cut Tin Snips

Straight Cut Tin Snips

Make long strokes for a long, straight snip tool cut. The straight snip is used for making precise straight cuts.

Compound snips are designed more for leverages & maneuverability than straight bites.

Suppose you are using compound snips, fully open and close the jaw with each stroke to maximizes the length of the cuts.

Even so, your cuts will probably be a little teary. It cuts metal almost as smoothly as it does paper with scissors.

And the longs blades make it easy to cut straights & leave a smooth edge. Straight-cut tin snips are designed for one purpose that is a simple straight line cutting and trimming.

These snips cannot cut curves or circles. They appear simple in design with straight blades and long steel handles.

4. Duckbill Pattern Tin Snips

Duckbill Pattern Tin Snips

Duckbill pattern tin snips have specially shaped blades for cutting sharp curves and circles.

Because of their small blades, these tin snips are designed only for light-duty work, such as cutting metals of high gauge thickness.

5. Bulldog Pattern Tin Snips

Bulldog Pattern Tin Snips

Bulldog pattern tin snips are made for heavy-duty work and are specifically designed for cutting, trimming, or cutting hard alloys.

They have shorter blades and longer handles, which gives them more leverage and allows them to cut thick metal up to 16 gauge.

Useful Article For You

6. Spring-Loaded Tin Snips

Spring-Loaded Tin Snips

Spring-loaded tin snips have handles that have a compressed or stretched spring between them for heavy-duty work, such as cutting sheet metal of low gauge numbers.

They can do this because the spring takes the tension off the muscles of the user’s hand.

Also, Read: How Does a Wood Plane? | Parts of the Wood Plane | Types of Wood Planes

7. Curved Tin Snips

Curved Tin Snips

Curved tin snips have round blades that are designed for tasks that require cutting curves or circles.

They often resemble straight-cut tin snips in appearance and design, with long handles for control.

8. Jewellers Tin Snips

Jewellers Tin Snips

Jewelers tin snips are special types of pieces designed for light-duty metals and complex jobs due to their finely sharp blades.

As their name suggests, they are uses for making jewelry and can be used by both professional silversmiths and hobbyists. Various versions can be purchased for straight or curved cuts.

9. Universal Tin Snips

Universal Tin Snips

Universal tin snips can be used for straight cuts or long, wide curves. They are available in straight handled, left hand-cranked, or right hand-cranked versions.

10. Utility and Multi-Purpose Tin Snips

Utility and Multi-Purpose Tin Snips

Utility and multi-purpose tin snips are general-purpose tools due to the fact that they are designed to cut wides in a variety of different materials rather than just metal.

They can be used to cut and trim many household and workshop items.

11. Straight Pattern Tin Snips

Straight Pattern Tin Snips

Straight patterned tin snips are often simple in design and strong in construction.

These special tin snips are made for heavy-duty metal cutting due to their comfy grip handles and special blades that are made from drop-forge carbon steel.

Also, Read: Keyless Remote Battery Is Low | When Does Key Fob Battery Replacing Replacing? | How to Replace a Keyless Remote Battery

Frequently Asked Questions (FAQ)

Tin Snips

Snips, also known as shears or metal snips, are hand tools used to cut sheet metal and other tough webs. They are often referred to as tin cutter tools. There are two broad categories: tinner’s snips, which are similar to common scissors, and compound-action snips, which use a compound leverage handle system to increase the mechanical advantage.

What Are Tin Snips?

Tin snips, also known as what are tin snips used for, tinner snips, and shears, are hand tools specifically designed for cutting sheet metal. They are a type of tin cutter. Tin snips look similar to ordinary scissors; however, they are much sturdier and allow control for precise cutting.

Aviation Snips Use

Aviation snips, sometimes confused with sheet metal snips, are color-coded to help users identify which direction they cut. Aviation snips, also called tin snips or compound snips (even though they are different), are the best hand tools for cutting sheets of metal.

Aviation Snips Vs Tin Snips

Both what are aviation snips and tin snips, or tin snips vs aviation snips as some might compare, are incredibly useful tools. Aviation snips are best for making precise turns on thick metal, while tin snips are better for straight cuts through thin metal.

Types of Tin Snips

  • Choose Your Tin Snips
  • IRWIN Tin Snip, Multi-Purpose
  • Straight Cut Tin Snips
  • Duckbill Pattern Tin Snips
  • Bulldog Pattern Tin Snips
  • Spring-Loaded Tin Snips
  • Curved Tin Snips
  • Jewellers Tin Snips
  • Universal Tin Snips
  • Utility and Multi-Purpose Tin Snips
  • Straight Pattern Tin Snips

Like this post? Share it with your friends!

Suggested Read –

About Rajkumar Gupta

Hey, I am Rajkumar. The Man Behind MechanicalJungle. I started this site to spread knowledge about Mechnical Engineering. I am a Degree Holder in Mechanical Engineering.

You can find him on Facebook,  Tumblr, and Google News, Instagarm, Twitter.

Leave a Reply

Your email address will not be published. Required fields are marked *

Best Article

Advertise

At Mechanicrealm, we clarify Mechanicrealm engineering and publish all the happenings & news of Mechanical engineering.

Get Traffic & Exposure. We help brands optimize their online presence & performance. [ More Detail]

Connect with Us

/* */