How Does a Turbofan Engine Work? | Turbofans Engine | Turbofan Engine for Sale

How Does a Turbofan Engine Work

Turbofan Engine Introduction

The Turbofan engine or the fanjet engine is the type of jet engine that breathes air and is used widely in pushing aircraft. The turbofan word combines “turbo” and “fan.” To fly high in the sky, aircraft need thrust, and some thrust generating system produces this thrust.

Nowadays, most of the engines in aircraft use engines that are based on the turbofan principle. Most aircraft use turbofan engines because of their capability to generate high thrust and fuel efficiency.

In this article, you will learn about Turbofan engines, how turbofan engines work, and the value of turbofans in the market. And many other knowledgeable and quality content helps you improve your knowledge.

Also, Read: Aircraft Engine | Types of Aircraft Engines | Most Powerful Turboprop Engine | New Twin Turboprop Aircraft

How Does a Turbofan Engine Work?

  • We will start from the basics.
  • Jet engines are also known as gas turbines, and it works such that they pull the air into the front of the Engine with the help of the fan. In the Engine, the air gets compressed by the Engine, which is mixed with the fuel and ignites it, then throws it out to the rear(Backside) side of the Engine to produce the thrust.
  • The first part of the front part of the turbofan engine is the engine fan. This fan is made up of blades that are made of titanium. The air going into the aircraft engine moves toward two parts.
  • A little air moves towards the core of the Engine in which combustion will occur, and the remaining air also called bypass air, will move towards the engine core through the duct.
  • The engine inlet gains air which is coming. Some of this air then passes from the engine fan and continues going towards the core compressor, and from it, air moves toward the burner. And in the burner, it mixed with the engine fuel, and then the combustion occurred.
  • The hot exhaust will pass through the fan turbine and core and then get out from the nozzle.
  • The compressor in the Engine is placed in the front part of the engine core.
  • Through the combustor, the air will make its way and flow from the turbine. The turbine is a series of airfoil-shaped blades, the same as the blades in the compressor.

The air flows at high speed in the sky. This airflow over the blades of the turbine extracted their energy from the air to spin the turbine in a circular/circle and turn the engine shaft connected to it.

On the same shaft, the fan and the compressor are connected to spin the turbine on the front of the aircraft engine air is pulled so it will be mixed with the aircraft fuel and burned.

  • The important exhaust duct of the Engine is nothing but a nozzle. The nozzle is the part of the aircraft where the third law of Isaac Newton’s law is that there is an equal and opposite reaction for every move.

In aircraft, they push the air out of the Engine at extremely high speed to move or fly the airplane in the forward direction.

There is a mixture in the nozzle of the exhaust. It will mix a little bypass air flowing around the aircraft’s Engine with warm combusted air, making it much quieter.

Also, Read: How Do Aircraft Brakes Work | How Aircraft Brakes Work | Brake Design | Aircraft Brakes

Turbofans Engine

Turbofans Engine

The most modern model of the gas turbine is nothing but a turbofan engine. There is a core engine in the turbofan engine, which is surrounded by the fan in the front and one which is an additional turbine at the rear.

The fan of an aircraft engine and fan turbine is a collection of many blades, such as a core turbine and core compressor. With the turbine and compressor core, few blades of the fan turn with the shaft, and few blades remain stationary.

The shaft of the fan passes from the shaft of the core for some mechanical reasons; such a type of arrangement is known as two spool engine. By the company Boeing, the large GEX9 turbofan engine was built. These engines are built to power the airplane like the airplane 777X in the year 2018.

Turbofan engines are the most efficient engines. The speed of the turbofan aircraft is about between 500km/h to 100km/h

This speed is operated by many commercial aircraft. Turbofan engines which are large like CF6, are designed for the long route/distance flight, which travel time is about ten to fifteen hours for each or per flight.

Turbofan engines can produce thrust at a low speed. The first aircraft company which used turbofans for mountain aircraft is nothing but Boeing, which got started in the year the 1980s.

To intake air in the Engine, engineers used a big fan which made it easy. A turbofan engine is designed in such a way that it combines features and technology of turboprop and turbojet engines.

  • Turbofan engines come with big fans to suck the air.
  • While using a turbofan engine, the airflow is from the aircraft engine’s exterior to give the aircraft more power to fly in the air.
  • Nowadays, most airlines get power from turbofan jet engines. Air enters the turbofan jet engine and flows from a generator that produces hot air.
  • A generator in an aircraft is made up of a turbo/turbine combustion chamber and a compressor.
  • Less air will pass through the Engine (turbofan) and reach the combustion chamber.
  • The remaining air will pass through the compress, which has low pressure, or pass by a fan. Afterward, it will be mixed with gas produced, or otherwise, it will eject directly.
  • The main reason behind this process is to produce power at the same time they are trying to maintain a consistent level of consumption.

Also, Read: What Is Aircraft? | Classification of Aircrafts | Types of Aircrafts

Turbofan Engine for Sale

Turbofan engines are too expensive compared to turbojet engines, and maintenance costs of turbofan engines are also high. These turbofan engines are very expensive to buy and manufacture or build. That’s why they take around 92% of the total value from the market.

And it takes 46 percent of all units which get produced. So it is hard to say the actual price of the turbofan engine, but roughly, we can say that it is nearly 10 to 37 million dollars.

Turbofan engines sell at a minimum of about 10 million dollars.

Some Facts About (Turbofan Engines)

Sometimes Turbofan engines are known as fanjet or bypass engines; this is one of the models of jet engines that generate thrust with the help of or the combination of core efflux of jet and bypass air that is accelerated by a fan of the duct which is driven by the core jet.

The turbofan engine that drives most jet engine core efflux thrust is a low bypass engine. And on the other hand, the Engine whose most thrust derives from the fan is known as a high bypass engine.

Generally, these low bypass engines are found most of the time in the army and military applications, and on the other hand, high bypass turbofan engines come in designs that are prevalent nowadays in commercial aviation engines of the jet.

The turbofan engine has a core similar to the turbojet engine, and most of it has a design of two spools. This turbofan engine was invented by the people known as frank whittle, Hans von chain, and Albert Fono. These people together invented the turbofan engine.

In the aircraft, the fan blade’s speed is nearly 3,000 RPM.

Many people have questioned whether the rain affects the turbofan engines, but the answer is not because most of the storm clouds produce light rain.

The rain clouds are also made up of small crystal ice, which doesn’t affect the turbofan engine. Many people don’t know that a turbojet engine is quieter than a turbofan engine.

Also, Read: How Many Types of Planes? | Certificates Versus Ratings | Light Sport Airplanes and Experimental Aircraft | Types of Planes

Small Turbofan Engines

Engine DGEN is the world’s smallest turbofan engine. This is planned for the 4 and 5 seats two-engines VLJ which flies under twenty-five thousand feet and Mach 0.35.

With easy integration and maintainability, DGEN is designed (fuel consumption is low and noise level is also low). The Engine of the aircraft control unit and also, at the same time, fuel and oil equipment is integrated fully over the Engine, which FADEC controls.

FADEC is known as (Full Authority Digital Engine Control). The high-pressure spool generator device is integrated. And it allows the electrical start of the aircraft engine before it switches to the generation mode.

These engines are reliable and easy to control for the pilot on the aircraft. The fan blade of the turbofan engine is made up of shaping titanium molten by a hot presser.

Also, Read: Electrostatic Precipitator Working Principle | What Is Electrostatic Precipitator? | Types of Electrostatic Precipitator


The combustor in the aircraft engines is the place where fire happens. As air first exists in the compressor and then enters the combustion chamber, it will be mixed with the fuel that is ignited.

The sound of the combustor is very simple, but in reality, it is very complex to understand this process. This is because combustors require stable fuel combustion or air mixture when the air travels from a combustor at a very fast rate.

The work of the diffuser is to slow down the air from the compressor, which makes it easier to ignite. The dome and the swirler add turbulence in the air so it can easily mix with the fuel. And the fuel is sprayed into the air by the fuel injector to mix the air that can be ignited. The liner is the part in the Engine where all the combustion occurs. It has many different inlets to enter the combustion zone.

  • From the fan, the air which goes through it has a velocity that increases from the free stream. From the core, the turbofan engine gets some of its thrust and some from the engine fan.
  • The air ratio that goes throughout the Engine to air that moves throughout the core is called the bypass ratio.
  • Because of the fan’s addition, the fuel flow rate gets changed. The fuel used by the core uses the same amount as the turbofan engine and produces more thrust.
  • It means the turbofan engine is too fuel efficient.
  • If the bypass ratio of a turbofan is high, they are as near fuel efficient as turboprops. This is because the inlet encloses the fan and is a collection of many blades. Compared to normal propellers, it can also operate efficiently at high speed.
  • That’s why turbofan engines are used when the aircraft travels or transports at high speed; in short, it is used in high-speed aircraft, and propellers are used at low speed.
  • Turbofans with low bypass are more fuel efficient than basic turbojets. Modern planes/fighter planes equipped with afterburners use these low bypass turbofans.
  • Even if the military jets fly faster than sound speed, the air in the aircraft engine travels less than the speed of sound for high efficiency.

These engines produce a large thrust by drawing the air by compressing it, igniting it, and exhausting it to the back of the plane. And this all the process takes place in large fuel efficiency.

So whenever you travel from a plane, whether sitting in a plane as a pilot or passenger, take a minute and think about the engineers who made it possible or made the plane fly at the speed of sound. Great salute to such engineers.

Also, Read: How does a Turbojet engine Work? | Turbojets Engine | Turbojet Engine for Sale

Frequently Asked Questions (FAQ)

Turbofans Engine

A turbofan engine, sometimes referred to as a fanjet or bypass engine, is a jet engine variant that produces thrust using a combination of jet core efflux and bypass air which has been accelerated by a ducted fan that is driven by the jet core.

Turbofan for Sale

We have 48 Aircraft Turbine engines for sale. Search our listings for overhauled, new, & used airplane engines updated daily from 100’s private sellers.

How Does a Turbofan Work?

The incoming air is captured by the engine inlet. Some of the incoming air passes through the fan and continues on into the core compressor, and then the burner, where it is mixed with fuel and combustion occurs.

How Does a Turbofan Engine Work?

The incoming air is captured by the engine inlet. Some of the incoming air passes through the fan and continues on into the core compressor, and then the burner, where it is mixed with fuel and combustion occurs. The hot exhaust passes through the core and fan turbines and then out the nozzle, as in a basic turbojet.

Leave a Comment

/* */