What Is the Purpose of a Car Blower Motor? | Why Does My Car Blower Motor Turn On and Off Repeatedly?

What Is the Purpose of a Car Blower Motor?

The objective of this blower engine is to permit blowing air to reach via the vents by repositioning the electrical breeze.

It operates an engine resistor and exchange to regulate the speeds of airflow. The blower engine is the primary electric engine in the automobile HVAC method.

With the correct functioning of the blower engine, your automobile energy can avoid an overheating situation that concerns your automobile machine. You can work and control cabin temperature according to your selection.

In reserve, It’s not exclusively necessary for working an air conditioner procedure on your automobile.

Also, Read: What Is a Car Air Filter? | The Benefits of a Clean Engine Air Filter

How Does a Blower Motor Resistor Work?

Because antagonism creates heat while the breeze drifts, the blower resistor is scaled in the duct about the blower engine, so the consequent airflow intention maintains the resistor undisturbed.

The relay then completes its communications, providing the highest voltage to the fan because a relay can tolerate the existing better than the fan control.

If the fan malfunctions like if the fan gleam is rotating in the blower enclosure hub without rotating the enclosure so that no air is pushing above the resistor, but the draft is still completing warmness in the resistor pack, the thermal fuse that is required to the resistor group spreads the electrical course to contain the resistor(s) from obtaining too desirable.

On temperature managing techniques without mechanical temperature management, the blower engine swiftness is governed by a control wired to a danced resistor that usually contains a thermal fuse.

A straightforward electrical principle named “voltage descent” is utilized to comprehend how the blower resistor outcomes.

When a control, a resistor, and a load are wired in sequence, the resistor “drops” some of the voltage given via it, virtually diminishing both current discharge and voltage at the engine.

Eventually, with the lover changes at the most elevated pace, the fan motor obtains method voltage 14.5 with the machine running.

Some designs will energize a relay when the button is positioned at the most grown fan speed. Two resistors are ignored in the following most elevated pace, and only one resistor stays in succession with the engine (load).

A voltmeter attached to both futures of a resistor while the draft is handed through to a load will estimate the quantity of voltage standing “settled” by the resistor.

Because more inferior voltage indicates more downward current provided to the fan, the footed resistor rotation can be employed to regulate the fan pace.

Considerable blower fans will contain a relay supplying energy to the “burning” fan airfield, and the blower resistor intention delivers the course to drop.

The blower controller and its crew of resistors are wired so that when the blower regulator is positioned at the most inferior pace, the highest portion of voltage is decreased.

The smallish portion of the draft is fed to the engine because it is handing through an exclusive sequence of resistors for our objectives, we’ll communicate there are three resistors.

In the subsequent most increased speed, one of the three resistors is ignored, and since the voltage is solely holding to push the wind via two resistors, the fan engine runs a bit quicker.

Also, Read: Is Washing A Car With A Pressure Washer Safe? | How to Use a Pressure Washer to Clean Your Car

Why Does My Car Blower Motor Turn On and Off Repeatedly?

We have investigated the causality of this problem and discovered that you can readily diagnose and restore this yourself.

A stormy encounter is usually the wrongdoer for an automobile blower motor, depending on and off sporadically. As the brushes model down over duration, they relinquish their capacity to execute electricity.

This pushes your blower to rotate on and off intermittently. A wrong brush pushes a loose connection in the commutator.

Does your blower engine end up working and begin operating again for a while especially if you move over a ridge?

Either the brush is too muddy, so electric conduction is jammed, or too bland to include tightly in the commutator as it rotates.

Carbon brushes in the commutator are employed to execute electricity.

Also, Read: Why Does My Car Make a Rattling Noise on Cold Start? | What Is a Cold Start?

How to Analyze Intermittent Blower Engine

When your blower engine struggles to supply consistent airflow and work intermittently, it signals that there is some quiet place in the relationship.

A dead area is a standard problem when enclosing a stale or contaminated carbon brush. This can drive the sporadic function of your blower engine.

If you got your automobile brand further, it’s unique for its blower engine to operate in automated situations under everyday use.

Fortunately, there’s an uncomplicated way to notice this situation, and we’ll steer you in a team of efforts! It can be challenging to pinpoint a dead place if you’re not a machinist.

But before you can begin, you’ll require an oscilloscope. This is because you can anticipate it to last indefinitely as it operates as long as your car runs.

1. The Blower Cuts Off or Is Slow to Kick In

If it slashes off for no evident reason, probabilities are that something is inaccurate. While moving, be infallible to pay close awareness to the feeling of your blower engine.

Moreover, if the blower engine does not boot the instant you shove the associated button, there is something immoral with it.

2. Strange Noises Coming From the Interior Vent Area

A reasonable argument is to crank up the fan pace to the maximum and attend to aggressive whirring sounds, which evolve louder the more the fan pace.

If you listen to any abnormal and sudden fathers and crackles reaching from the A/C flues or if the importance of the proper modifications regularly, there is presumably a concern with the blower engine voltage.

3. Hitting the Heater Box Turns On the Blower Motor

Some likewise declared that lightly knocking on the machine can intermittently push the blower to depend on and out. Suppose your blower engine turns on and off while reaching over potholes and street undulations.

In that case, the probability is that you will be qualified to turn the blower back on by hitting the chest/dashboard.

Also, Read: How Often Should I Check My Car Tyre Pressure? | What Affects Tire Pressure

How Is the Blower Motor Control Module Tested?

If the scan instrument is private, there is a self-testing or diagnostic manner in many automobiles with a computerized climate management technique. Another way is to restrict the voltage at the blower engine, the blower engine command module, and additional rotation components according to the usefulness manual. Machinists at a dealership can analyze the HVAC procedure with a scan instrument.

Normally, it can be triggered by shoving and holding diverse regulators. For illustration, in the 2009 Honda Accord, the usefulness manual defines the method: Turn the ignition to ON. Press and maintain the OFF switch, and within ten beats, press and discharge the Window Defogger switch in five periods.

The method joins the self-diagnostic manner; at the back of it, if there is a situation, the responsibility code intention is depicted on the production.

The usefulness manual defines the testing process for separate regulations. The blower engine management module Honda contacts its Power Transistor provides the foundation.

In some GM trucks, a blower engine management module defeat can push the front blower engine to cease functioning or run behind the automobile that has closed off.

The GM bulletin 06-01-39-002C represents this situation that transpires in frigid weather. The magazine advises returning the blower engine management module. GM names it Linear Power Module (LPM).

The authority transistor has four wires:

• Two arrive from the temperature management method command team.
• One is the background.
• One belongs to the unfavorable airport of the blower engine.

The service manual recommends estimating the voltage at the blower engine, then, if not OK, at the authority transistor, and so onwards.

For illustration, in the noted 2009 Honda Accord, the + 12V energy is provided straight to the blower engine via the fuse and the relay.

BMW contacts the blower engine management module a Last Staging Unit, which is again somewhat expected to fail.

Occasionally, it accomplishes fails but drives the blower engine to cease functioning intermittently or conduct at diverse paces.

A fallen Dominion transistor was a rather standard causality for not functioning blower engines in some Honda and Acura automobiles.

For the model, the Honda bulletin 03-048 explained a difficulty where the blower engine for the posterior HVAC method in the 2003 Captain would not function at all rates.

Also, Read: Can You Wax Your Car Too Much? | Some Reasons Why You Should Wax Your Car

Bad or Failing Heater Blower Motor Resistor

The blower engine resistor is an electrical element that is an amount of the automobile’s heating and air movement technique.

It is accountable for holding the blower motor’s fan speed. Standard symbols include the automobile’s heater not functioning, getting stuck at a specific speed, or something getting jammed in the blower engine.

When the fan pace is adjusted via the knob on the device cluster, the blower engine resistor differences environment, which modifies the speed of the blower engine.

Usually, an inadequate or falling blower engine resistor will deliver periodic signs that can caution the motorist of a potential problem.

As the fan pace is one of the numerous continually modified settings of the air movement procedure, the blower engine resistor is positioned underneath steady tension, which can compel it to fail ultimately.

A forgotten blower engine resistor can generate problems with the function of the whole heating and air movement technique.

1. Blower Motor Stuck on One-Speed

The blower engine resistor is the element directly accountable for maintaining the blower engine fan swiftness.

The heating and air movement techniques may always operate at one speed, regardless of the resistor intention control to be returned for maximum functionality to be repaired.

If the resistor shorts or falls, the blower engine may stay stuck on one fan speed. A standard manifestation of a faulty blower engine resistor is a blower engine adhered to one location.

2. The Blower Engine Does Not Work on Specific Settings

If the blower engine resistors’ interior components fall, it may compel the blower engine to malfunction or not operate on one or more additional settings.

Another standard sign of a faulty blower engine resistor is a blower engine that does not position on specific settings.

A blower motor switch can also cause this controller, so a sound diagnosis is favored if you are skeptical of the problem.

3. No Air from the Automobile’s Vents

Administration to the blower engine is fed via the blower engine resistor, so if it fails or contains any problems, strength can be cut off to the engine.

Another sign of a faulty blower engine resistor is no air from the automobile’s ducts. A blower engine without authority intention is not competent to create any air intimidation.

Consequently, the heating and air movement procedure intention be vacated with no air reaching from the ducts.

If your automobile is depicting any of the signs overhead, or you suppose that your blower engine resistor may stand keeping a problem, control the automobile examined by an experienced technician, such as one from Your Machinist, to resolve if the element should be returned.

As the blower engine resistor is the element instantly accountable for powering the blower engine, major problems with the blower engine and the heating and air movement technique can occur.

Also, Read: Should I Check My Oil When The Engine Is Hot or Cold? | How to Check Oil in a Car in Some Steps

How to Fix a Car Blower Motor That’s Working Intermittently?

The resolution to this intermittent issue counts on the reasons.

1. Easy Fix For Engine Problem

Your regional automobile parts rehabilitation base can support you in selecting the proper engine according to your automobile model. If the issue is with your blower engine or its parting, you should adjust it.

It’s a suitable idea to change the resistor and the dead engine if it functions flawlessly because the bond wires might complete a problem.

2. Easy Fix For Fan Issue

However, exclusively adjusting it will only unravel this situation partially.

Engrave out all the mating connector airports and return those separately. You must adjust or replace the command committee for the fan issue. For this, your strength encounters replication defeat.

Otherwise, the opposition causes more heat, relocating into the button and repositions the overheat into the pristine aerodromes.

3. Easy Fix For Wire Issue

Modify the steamed or dissolved wires if you catch any in accumulation and regard matching inline fuses.

Furthermore, occasionally cleansing the complete wiring translates the problem, but if it accomplishes function, you ought to adjust the resistor.

4. Easy Fix For Relay

If the periodic operation happens for the fan engine relay, the most immediate thing you strength do is locate out identical one from an automobile region’s shop and return it.

Also, Read: Why Does My Car Overheat When The Ac Is On? | What Are the Parts of Air Conditioning in Cars?

What’s The Function of A Blower Motor Resistor?

Because of this resistor, the fan swiftness can be modified from downward to elevated and everything in between.

The more increased the resistance, the more sluggish the fan reaches, resulting in more undersized airflow, either cold or scalding.

Many contemporary automobiles have shifted from the standard blower engine resistor to an electronic command module. As the fan reaches deliberately, there’s not as extensive air spreading in the automobile cabin.

It requires an electronic instrument that changes the paces. The blower engine resistor is an electric component that intercepts or opposes current discharge to the blower fan engine.

If the automobile solely had a blower engine, it wouldn’t be flexible. You can operate the air conditioning or heater at simply one fan speed.

Nonetheless, you can quickly change the fan pace by modifying the surroundings, which modifies the antagonism and transmits the signal to the blower engine.

Also, Read: How to Fix a Leaking Car Roof | Why Water Leaks into Car from its Roof? | Why Is Water Leaking into My Car?

Where Is the Blower Motor Resistor Located?

Naturally, it’s inside a chimney tight to the fan. Computerized temperature management techniques now utilize a computer that reads the temperature and causes adjustments for you.

The resistor is attached straight to the dashboard control with a manual approach, which exclusively varies when you complete the adjustment. Fan swiftness is changed counting on what the fancied temperature is.

The blower engine resistor is an electrical element discovered between the ventilation blower or fan and the energy origin.

Also, Read: Functions of Car Wheel | Parts of Car Wheel

How Do You Test A Blower Motor Resistor?

Usually, the fan is reaching to fall at particular speeds, which is a clear-cut sign of a wrong resistor. Still, completing a diagnosis before returning to territories is essential.

Unless you know what’s causing the defeat, you don’t enjoy merely throwing regions at the situation.

If you’ve delivered the heating and air movement procedure a temporary look and can’t discover anything immoral, it’s time to concentrate on the blower engine resistor.

You could conclude up expending capital on components that are not required. It can drive you to create an automobile fire.

Rather, observe these actions or any in your usefulness manual.

As experienced technicians, we must remind you that it’s not secure to avoid the blower resistor:

• Return the resistor and broken connectors if you notice either of these symptoms. Inspect the blower engine resistor visually. You are scrutinizing for symptoms of scorching or decline. Yet, you must be infallible to weave the wires perfectly or intend to avoid identical situations.
• It must read ohms, and you enjoy crossing one quest to the standard result airfield and then further to the information airfields. Check the antagonism of the resistors with your multimeter. Reference your homework with the schematic in your assistance manual.
• If there’s any unlimited antagonism displayed, the resistor ought to be returned because there’s an available rotation.
• Furthermore, only tolerate the blower resistor with consideration. Electrical breezes are hanging through the automobile domain so that it can produce heat. It’s likewise feasible that you must return the fan if it is rotating gradually or laboriously. The heat can contact sociable adequately to scorch your fingers.

Also, Read: Why Does My Car Jerk When I Brake | Why Does My Car Jerk When I Brake and Solutions

How Much Does It Cost To Replace A Blower Motor Resistor?

Wish to spend almost $40 to $100 on the domain and another $50 to $75 for labor if you can’t achieve the substitute yourself.

If all you require is the resistor, you can expect this to be one of the most affordable automotive air movement rehabilitation. The moderate substitute cost of a blower engine resistor is between $90 and $175.

Nevertheless, it would be best if you kept in mind that the multiple standard explanation for a poor blower engine resistor is due to a bad fan engine. Thus, you should return the engine and the resistor for a long-term restoration.

For illustration, if you require establishing a new engine, the price could go up another $500. Nevertheless, it’s conceivable that additional components ought to be returned simultaneously, improving your expenses.

Your alternate costs count heavily on the ensuing elements:

• Period/make/example of automobile
• Place of restoration
• Kind of store utilized (dealership vs. independent)

You can do it yourself if you maintain some fundamental automated understanding and generic mechanic instruments. As specialists, we assure most motorists can tolerate this reserve independently.

The profitable information is that it’s not challenging to return the resistor. Grant yourself an hour or two to conclude the appointment if you maintain an assistance manual to track.

Also, Read: Carrier AC Unit Not Cooling | Carrier AC Unit Reset Button

How to Replace a Blower Motor Resistor

In our background, the hardship depends on where the blower engine resistor is discovered. If folded behind a dash or tight against a firewall, you may withdraw some additional components for admission.

Don’t panic: numerous automotive engineers have adequate foresight to position the blower machine resistor in an easy-to-reach location, like after an entrance panel or removable flap.

While all automobiles and trucks are further, returning a blower engine resistor can be a concise matter.

Furthermore, all automobile applications counter, but we’ll stroll you through the assignment on our 2004 Nissan Sentra examination matter. It’s rather comparable to additional automobiles we’ve operated on, though.

Review the promenade downward, and let us comprehend how the job reaches you in our remarks province.

Once you’re competent to contact the something, the genuine job of returning the blower engine resistor will presumably be rather straightforward.

If you’ve gained some fundamental computerized talent and can plug in an Atari play cartridge, you presumably maintain adequate know-how to accomplish the job.

Also, Read: What Does a Car with a Lock Symbol Mean? | Meaning of Car with Lock Symbol | How to Fix Cars with Lock Symbol

Conclusion

Because it specifies how quickly the blower engine fan rotates, the blower engine resistor is the numerous helpless position of the instrument.

Even so, if your automobile contains additional severe problems with the machine or information, attempting to repair the blower motor resistor may not be worth the capital.

When the resistor in the blower engine dies, you should return it instantly. If not, you may discover yourself without functioning heating and cooling.

A blower engine resistor may exist as a smallish segment of the HVAC method, but it plays a meaningful position regardless. It would be best to restore the blower engine resistor when it contacts that promptly.

Also, Read: Car Shakes When Idling | Car Idles Rough and Shakes | Car Shaking While Idle

---

Frequently Asked Questions (FAQ)

How to Know If Your Blower Motor Resistor Is Bad

The most common symptom of a bad blower motor resistor is that you will only notice that your blower is working on the highest speed setting or that it won’t work at all. The main symptoms of a bad blower motor resistor include Only One Speed From the Blower Motor. Various Airflow Settings Not Working.

Why Does My Car Blower Motor Turn On and Off Repeatedly?

One possibility is that the motor is overheating and shutting off to prevent damage. Another possibility is that there is an issue with the electrical connection to the motor, which could be caused by a loose wire or a problem with the switch or relay.

What Is the Purpose of a Car Blower Motor?

The purpose of the blower is to distribute fresh air at a comfortable temperature into the cabin and to prevent internal fogging of the windscreen. An electronic control device regulates the car blower’s ventilation power and speed. All vehicles are equipped with a blower, even those without air conditioning.

How Does a Blower Motor Resistor Work?

The blower motor resistor is responsible for controlling the blower motor speed. In the past, this was done by varying the voltage supplied to the blower motor. In newer applications, the blower motor resistor is actually a solid-state module that sends a varied signal to the blower motor.

How Is the Blower Motor Control Module Tested?

Typically it’s done by measuring the voltage at the blower motor connector when it’s turned on. If there is a voltage at the motor (at least 4-6 Volt at low speed and 12 Volt at high speed), but the motor doesn’t run, the motor is bad or jammed. Testing the voltage at the blower motor.

Blower Motor Stuck on One-Speed

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however, the resistor will have to be replaced in order for full functionality to be restored.

---